                                  INTRODUCTION

This is wimlib version 1.6.0 (January 2014).  wimlib is a C library for
creating, modifying, extracting, and mounting files in the Windows Imaging
Format (WIM files).  These files are normally created using the ImageX
(imagex.exe) or Dism (Dism.exe) utilities on Windows, but wimlib is distributed
with a free implementation of ImageX called "wimlib-imagex" for both UNIX-like
systems and Windows.

                                  INSTALLATION

To install wimlib and wimlib-imagex on Windows you simply need to download and
extract the ZIP file containing the latest binaries from the SourceForge page
(http://sourceforge.net/projects/wimlib/), which you may have already done.

To install wimlib and wimlib-imagex on UNIX-like systems (with Linux being the
primary supported and tested platform), you must compile the source code, which
is also available at http://sourceforge.net/projects/wimlib/.  Alternatively,
check if a package has been prepared for your Linux distribution.  Example files
for Debian and RPM packaging are in the debian/ and rpm/ directories.

                                    WIM FILES

A Windows Imaging (WIM) file is an archive designed primarily for archiving
Windows filesystems.  However, it can be used on other platforms as well, with
some limitations.  Like some other archive formats such as ZIP, files in WIM
archives may be compressed.  WIM files support multiple compression formats,
including LZX, XPRESS, and LZMS.  All these formats are supported by wimlib.

A WIM file consists of one or more "images".  Each image is an independent
top-level directory structure and is logically separate from all other images in
the WIM.  Each image has a name as well as a 1-based index in the WIM file.  To
save space, WIM archives automatically combine all duplicate files across all
images.

A WIM file may be either stand-alone or split into multiple parts.  Split WIMs
are read-only and cannot be modified.

                             IMAGEX IMPLEMENTATION

wimlib itself is a C library, and it provides a documented public API (See:
http://wimlib.sourceforge.net) for other programs to use.  However, it is also
distributed with a command-line program called "wimlib-imagex" that uses this
library to implement an imaging tool similar to Microsoft's ImageX.
wimlib-imagex supports almost all the capabilities of Microsoft's ImageX as well
as additional capabilities.  wimlib-imagex works on both UNIX-like systems and
Windows, although some features differ between the platforms.

Run `wimlib-imagex' with no arguments to see an overview of the available
commands and their syntax.  For additional documentation:

  * If you have installed wimlib-imagex on a UNIX-like system, you will find
    further documentation in the man pages; run `man wimlib-imagex' to get
    started.

  * If you have downloaded the Windows binary distribution, you will find the
    documentation for wimlib-imagex in PDF format in the "doc" directory,
    ready for viewing with any PDF viewer.  Please note that although the PDF
    files are converted from UNIX-style "man pages", they do document
    Windows-specific behavior when appropriate.

                                COMPRESSION RATIO

wimlib (and wimlib-imagex) can create XPRESS, LZX, or LZMS compressed WIM
archives.  The following tables compare the compression ratio and performance
for creating a compressed x86_64 Windows PE image with XPRESS and LZX.  Note:
these timings were done on Windows so that the times would be fully comparable;
however, wimlib may have even better performance on other operating systems such
as Linux.  Timings were done with 2 CPUs available, both of which automatically
are used by wimlib for both XPRESS and LZX, and also by imagex.exe but
apparently only for LZX.

        Table 1. WIM size

                                           XPRESS Compression      LZX Compression
        wimlib-imagex (v1.5.3):            207,444,390 bytes       188,106,091 bytes
        Microsoft imagex.exe (Windows 7):  209,960,209 bytes       188,224,481 bytes

        Table 2. Time to create WIM

                                           XPRESS Compression      LZX Compression
        wimlib-imagex (v1.5.3):            73 sec                  202 sec
        Microsoft imagex.exe (Windows 7):  90 sec                  149 sec

The above LZX data are using explicitly specified maximum compression
('--compress=maximum') as of wimlib v1.5.3.  If `wimlib-imagex capture' or
`wimlib-imagex capture' is instead run with no '--compress' argument, then a
faster LZX compressor is used; it will produce results in between those given
for XPRESS and LZX above.

Note: if the absolute maximum but still compatible (i.e. not changing the
compression chunk size) LZX compression ratio is desired, `wimlib-imagex
optimize WIMFILE --recompress --compress-slow' on one of the above
LZX-compressed WIMs produces a WIM of 187,089,943 bytes in about 400 seconds.

                                  NTFS SUPPORT

WIM images may contain data, such as alternate data streams and
compression/encryption flags, that are best represented on the NTFS filesystem
used on Windows.  Also, WIM images may contain security descriptors which are
specific to Windows and cannot be represented on other operating systems.
wimlib handles this NTFS-specific or Windows-specific data in a
platform-dependent way:

  * In the Windows version of wimlib and wimlib-imagex, NTFS-specific and
    Windows-specific data are supported natively.

  * In the UNIX version of wimlib and wimlib-imagex, NTFS-specific and
    Windows-specific data are ordinarily ignored; however, there is also special
    support for capturing and extracting images directly to/from unmounted NTFS
    volumes.  This was made possible with the help of libntfs-3g from the
    NTFS-3g project.

For both platforms the code for NTFS capture and extraction is complete enough
that it is possible to apply an image from the "install.wim" contained in recent
Windows installation media (Vista, Windows 7, or Windows 8) directly to a NTFS
filesystem, and then boot Windows from it after preparing the Boot Configuration
Data.  In addition, a Windows installation can be captured (or backed up) into a
WIM file, and then re-applied later.

                                   WINDOWS PE

A major use for wimlib and wimlib-imagex is to create customized images of
Windows PE, the Windows Preinstallation Environment, on either UNIX-like systems
or Windows without having to rely on Microsoft's software and its restrictions
and limitations.

Windows PE is a lightweight version of Windows that can run entirely from memory
and can be used to install Windows from local media or a network drive or
perform maintenance.  It is the operating system that runs when you boot from
the Windows installation media.

You can find Windows PE on the installation DVD for Windows Vista, Windows 7, or
Windows 8, in the file `sources/boot.wim'.  Windows PE can also be found in the
Windows Automated Installation Kit (WAIK), which is free to download from
Microsoft, inside the `WinPE.cab' file, which you can extract natively on
Windows, or on UNIX-like systems if you install either the `cabextract' or
`p7zip' programs.

In addition, Windows installations and recovery partitions frequently contain a
WIM containing an image of the Windows Recovery Environment, which is similar to
Windows PE.

A shell script `mkwinpeimg' is distributed with wimlib on UNIX-like systems to
ease the process of creating and customizing a bootable Windows PE image.

                                  DEPENDENCIES

This section documents the dependencies of wimlib and the programs distributed
with it, when building for a UNIX-like system from source.  If you have
downloaded the Windows binary distribution of wimlib and wimlib-imagex then all
dependencies were already included and this section is irrelevant.

* libxml2 (required)
	This is a commonly used free library to read and write XML files.  You
	likely already have it installed as a dependency for some other program.
	For more information see http://xmlsoft.org/.

* libfuse (optional but highly recommended)
	Unless configured with --without-fuse, wimlib requires a non-ancient
	version of libfuse to be installed.  Most Linux distributions already
	include this, but make sure you have the libfuse package installed, and
	also libfuse-dev if your distribution distributes header files
	separately.  FUSE also requires a kernel module.  If the kernel module
	is available it will automatically be loaded if you try to mount a WIM
	file.  For more information see http://fuse.sourceforge.net/.  FUSE is
	also available for FreeBSD.

* libntfs-3g (optional but highly recommended)
	Unless configured with --without-ntfs-3g, wimlib requires the library
	and headers for libntfs-3g version 2011-4-12 or later to be installed.
	Versions dated 2010-3-6 and earlier do not work because they are missing
	the header xattrs.h (and the file xattrs.c, which contains functions we
	need).  libntfs-3g version 2013-1-13 is compatible only with wimlib
	1.2.4 and later.

* OpenSSL / libcrypto (optional)
	wimlib can use the SHA1 message digest code from OpenSSL instead of
	compiling in yet another SHA1 implementation. (See LICENSE section.)

* cdrkit (optional)
* mtools (optional)
* syslinux (optional)
* cabextract (optional)
	The `mkwinpeimg' shell script will look for several other programs
	depending on what options are given to it.  Depending on your Linux
	distribution, you may already have these programs installed, or they may
	be in the software repository.  Making an ISO filesystem requires
	`mkisofs' from `cdrkit' (http://www.cdrkit.org).  Making a disk image
	requires `mtools' (http://www.gnu.org/software/mtools) and `syslinux'
	(http://www.syslinux.org).  Retrieving files from the Windows Automated
	Installation Kit requires `cabextract' (http://www.cabextract.org.uk).

                                 CONFIGURATION

This section documents the most important options that may be passed to the
"configure" script when building from source:

--without-ntfs-3g
	If libntfs-3g is not available or is not version 2011-4-12 or later,
	wimlib can be built without it, in which case it will not be possible to
	apply or capture images directly to/from NTFS volumes.

--without-fuse
	If libfuse or the FUSE kernel module is not available, wimlib can be
	compiled with --without-fuse.  This will remove the ability to mount and
	unmount WIM files.

--without-libcrypto
	Build in functions for SHA1 rather than using external SHA1 functions
	from libcrypto (part of OpenSSL).  The default is to use libcrypto if it
	is found on the system.

--enable-xattr, --disable-xattr
	Enable or disable support for the extended-attributes interface to NTFS
	alternate data streams in mounted WIMs.  To support these, wimlib
	requires that the setxattr() function and the attr/xattr.h header are
	available.  The default is to autodetect whether support is possible.

--disable-multithreaded-compression
	By default, data will be compressed using multiple threads when writing
	a WIM, unless only 1 processor is detected.  Specify this option to
	disable support for this.

--enable-ssse3-sha1
	Use a very fast assembly language implementation of SHA1 from Intel.
	Only use this if the build target supports the SSSE3 instructions.

--disable-error-messages
	Save some space by removing all error messages from the library.

--disable-assertions
	Remove assertions included by default.

                                  PORTABILITY

wimlib has primarily been tested on Linux and Windows (primarily Windows 7, but
also Windows XP and Windows 8).

wimlib may work on FreeBSD and Mac OS X.  However, this is not well tested.  If
you do not have libntfs-3g 2011-4-12 or later available, you must configure
wimlib with --without-ntfs-3g.  On FreeBSD, before mounting a WIM you need to
load the POSIX message queue module (run `kldload mqueuefs').

The code has primarily been tested on x86 and x86_64 CPUs, but it's written to
be portable to other architectures and I've also tested it on ARM.  However,
although the code is written to correctly deal with endianness, it has not yet
actually been tested on a big-endian architecture.

                                   REFERENCES

The WIM file format is partially specified in a document that can be found in
the Microsoft Download Center.  However, this document really only provides an
overview of the format and is not a formal specification.

With regards to the supported compression formats:

- Microsoft has official documentation for XPRESS that is of reasonable quality.
- Microsoft has official documentation for LZX but it contains errors.
- There does not seem to be any official documentation for LZMS, so my comments
  and code in src/lzms-decompress.c may in fact be the best documentation
  available for this particular compression format.

The code in ntfs-3g_apply.c and ntfs-3g_capture.c uses the NTFS-3g library,
which is a library for reading and writing to NTFS filesystems (the filesystem
used by recent versions of Windows).  See
http://www.tuxera.com/community/ntfs-3g-download/ for more information.

The LZX decompressor (lzx-decompress.c) was originally based on code from the
cabextract project (http://www.cabextract.org.uk) but has been rewritten.

The LZX compressor (lzx-compress.c) was originally based on code written by
Matthew Russotto (www.russotto.net/chm/) but has been rewritten.  It now uses
suffix array construction code from divsufsort
(https://code.google.com/p/libdivsufsort/) and algorithms from 7-Zip as well as
several published papers.

lz_hash.c contains a hash-table-based LZ77 matchfinder that is based on code
from zlib but has been rewritten.  This code is applicable to XPRESS, LZX, and
LZMS, all of which are partly based on LZ77 compression.

A limited number of other free programs can handle some parts of the WIM
file format:

  * 7-zip is able to extract and create WIMs (as well as files in many
    other archive formats).  However, wimlib is designed specifically to handle
    WIM files and provides features previously only available in Microsoft's
    implementation, such as the ability to mount WIMs read-write as well as
    read-only, the ability to create LZX or XPRESS compressed WIMs, and the
    correct handling of security descriptors and hard links.
  * ImagePyX (https://github.com/maxpat78/ImagePyX) is a Python program that
    provides similar capabilities to wimlib-imagex.  One thing to note, though,
    is that it does not support compression and decompression by itself, but
    instead relies on external native code, such as the codecs from wimlib.

A very early version of wimlib is being used to deploy Windows 7 from the
Ultimate Deployment Appliance.  For more information see
http://www.ultimatedeployment.org/.

If you are looking for a UNIX archive format that provides features similar to
WIM, I recommend you take a look at SquashFS (http://squashfs.sourceforge.net/).

                                    LICENSE

As of version 1.0.0, wimlib and all programs and scripts distributed with it are
released under the GNU GPL version 3.0 or later.

wimlib is independently developed and does not contain any code, data, or files
copyrighted by Microsoft.  It is not known to be affected by any patents.

On UNIX-like systems, if you do not want wimlib to be dynamically linked with
libcrypto (OpenSSL), configure with --without-libcrypto.  This replaces the SHA1
implementation with built-in code and there will be no difference in
functionality.

                                   DISCLAIMER

wimlib comes with no warranty whatsoever.  Please submit a bug report (to
ebiggers3@gmail.com) if you find a bug in wimlib and/or wimlib-imagex.

Be aware that some parts of the WIM file format are poorly documented or even
completely undocumented, so I've just had to do the best I can to read and write
WIMs that appear to be compatible with Microsoft's software.
